The standard design is equipped with a simple torque output which reflects the viscosity's trends. Variations of the rotational speeds due to load fluctuations are electronically compensated. The setpoint rotational speed can be pre-set via an
analogue input or the serial interface. The torque and the setpoint rotational speed are issued via the analogue outputs and the serial interface.
| ViscoPakt® model | - 27 | - 57 | - 110 | Unit |
|---|---|---|---|---|
| Maximum torque | 27 | 57 | 110 | Ncm |
| Resolution | 0,07 | 0,1 | 0,2 | Ncm |
| Reproducibility | 1,5 | 3 | 5 | Ncm |
| Minimum speed | 150 | 150 | 150 | rpm |
| Maximum speed | 2200 | 2000 | 2000 | rpm |
| Speed uncertainty | 2 | 1,5 | 1,5 | % |
| Chuck size | 1 - 10 | 1 - 10 | 1 - 10 | mm |
| Type of protection controlling device | 20 | 20 | 20 | IP |
| Type of protection drive | 51 | 51 | 51 | IP |
| Approx. Weight | 2 | 3 | 4 | kg |
| Motor Diameter | 55 | 70 | 83 | mm |
| Length across axis (approx.) | 210 | 230 | 270 | mm |
| Extension diameter/length | 16 / 220 | 16 / 220 | 16 / 220 | mm |
| Max. viscosity | 10.000 | 40.000 | 70.000 | mPas |
| Max. Mixing quantity (H2O)** | 15 | 30 | 50 | Liter |
* Control Unit /Drive
** Reference values for propeller stirrer in H2O
