The LabDos®-ht throughput peristaltic pump is distinguished by its superior pump power and simplicity of operation. This robust pump is suited for a wide range of media, from highly pure liquids to extremely aggressive fluids.
With a feed rate of up to 13,000 ml/min it rounds off the LabDos® pump programme in the high-throughput range.
The pump may be manually operated via a potentiometer and has a 0…10 V/4…20 mA interface for external control.
- High-throughput dosing
- Oil analysis
- Dosing of chemicals
- Universally applicable
- High throughput
- Feed direction selectable
- Low pulsation feed
- High viscosity range
- No valves and washers
- Up to two Easy-Load® pump heads parallel usable
- High medium stability, inert, hygienic
- Suitable for solids-laden media
- Brushless, maintenance-free drive
- Easy to clean and to maintain
- Can be controlled either manually or via interfaces
- Change of hose in less than 30 seconds
|Feed rate||300…13.000 ml/min|
|Speed range||50…650 rpm|
|Hose wall thickness||3.2 mm|
|External control||4…20 mA/0…10 V, remote/local, direction (right/-hand/left-hand motion), start/stop, speed|
|Pump head||Up to two Masterflex Easy Load®|
|Power supply||115 V AC or 230 V AC; single-phase, automatic selection|
|Power consumption||4.5 A at 115 V/2.6 A at 230 V|
|Display||Seven-segment (rpm), 3-digit, green LED, 1 % resolution|
|Uncertainty of speed regulation||± 0.25 %|
|Housing material||Shatterproof steel housing with water protection and epoxy coating|
|Pump head materials||GF Nylon, Delrin®, stainless steel, cold rolled steel, Buna N, polycarbonate|
|Degree of protection||IP55|
|Approvals||UL508C, CSA C22.2, No. 14|
|Storage temperature||-45…+65 °C|
|Working temperature||0…40 °C|
|Dimensions (W x H x D)||250 x 230 x 350 mm|
|Scope of delivery||LabDos®-ht with pump head Easy-Load®, power cable, manual on CD|
The values given are maximum values and may vary depending on the hose material, pressure and viscosity.
The Extension Pump Head Easy-Load® for LabDos®-ht allows a pumping rate of §§§ and affords the usage of hoses with diameters of 0,5...4,8 mm.
Product code: IP-P-LABDOS-P-HT-EASY
|IP-P-LABDOS-P-HT||LabDos®-ht high throughput peristaltic pump with pump head Easy-Load®|