Advantages of T-Pot™
- Inexpensive temperature control system
- Reactor is easy to change
- Good control dynamics
- Safety temperature controller
| Heating power | About 1.5 kW |
|---|---|
| Temperature range | 30…200 °C |
| Heat transfer fluid | 500 ml |
| Cooling | Cooling coil with a pressure regulator and control valve, bubbling for supporting convection with the use of a regulating valve |
| Excess temperature protection | Adjustable 35…210 °C |
| Needed connections | 230 V AC, 7 A Tap water, 1.5…10 bar |
| LabManager® interfaces | 2 x digital outputs 1 x Pt100 input (RTD, bath temperature) |
| Preferred application | Heating and cooling of 2-litre single-jacket reactors |
| Product code | Description |
|---|---|
| IL-TPOT | T-Pot™ temperature control bath for single-jacket reactors |
| IL-TPOT-R | T-Pot™ reactor, 2-litre flat flange vessel DN120 cylindrical, vacuum-tight, borosilicate glass |
| IL-TPOT-RD | T-Pot™ reactor cover, stainless steel cover DN120, connecting pieces: 1 x central stirrer seal, 3 x NS29, 2 x GL14 |
| IL-TPOT-D | T-Pot™ washer, washer DN120, silicone with FEP-sheathing |
| IL-TPOT-RH | T-Pot™ fixing unit for lifting platform, stainless steel bracket with cable and hose routing elements |
| IL-TPOT-HP | T-Pot™ lifting platform, hydraulic lifting platform with manual lever, maximum. operating load 25 kg |
| ZK-T-HI26-BK-PA-Y-51 | Connecting cable for T-Pot™ temperature control bath on digital output module of a LabManager® |
| ZK-T-HI26-BK-PA-Y-01 | Connecting cable for T-Pot™ temperature control bath on LP-PTP8 of a LabManager®-Classic |
Downloads
Standard Thermostats
Preferred types
Our project engineers can give you skilled advice thanks to their many years of experience in the use of temperature control systems.
All of the thermostats shown have a serial interface and are thus compatible regarding connections to our automation devices with the use of our cable sets.
We supply the complete range from Huber, Julabo and Lauda.
Huber Petite Fleur
| Heating power, cooling power | 1.5 kW, 0.45 kW at 0 °C |
|---|---|
| Temperature range | -40…+200 °C |
| Pump pressure | 0.9 bar |
| Heat transfer medium volume | 1.5 l |
| Dimensions (D x W x H) | 450 x 260 x 504 mm |
| Preferred application/special feature | ALR to 2 l, high dynamics, closed heat transfer medium circuit |
| Product code | IT-HUPETFL1 |
Huber Tango nuevo
| Heating power, cooling power | 1.5 kW/3 kW, 0.7 kW at 0 °C |
|---|---|
| Temperature range | -45…+250 °C |
| Pump pressure | 0.9 bar |
| Heat transfer medium volume | 1.5 l |
| Dimensions (D x W x H) | 270 x 425 x 636 mm |
| Preferred application/special feature | ALR to 2 l, high dynamics, closed heat transfer medium circuit |
| Product code | IT-HUTANNU |
Huber Unistat 910w
| Heating power, cooling power | 6 kW, 5.2 kW at 0 °C |
|---|---|
| Temperature range | -90…+250 °C |
| Pump pressure | 1.5 bar |
| Heat transfer medium volume | 4.3 l |
| Dimensions (D x W x H) | 704 x 600 x 1,565 mm |
| Preferred application/special feature | Low temperature, high dynamics, closed heat transfer medium circuit |
| Product code | IT-HUUNISTAT |
Julabo Presto A40
| Heating power, cooling power | 2.7 kW, 1.2 kW at 20 °C |
|---|---|
| Temperature range | -40…+250 °C |
| Pump pressure | 0.3…1.7 bar |
| Heat transfer medium volume | 3.5 l |
| Dimensions (D x W x H) | 590 x 330 x 670 mm |
| Preferred application/special feature | ALR from 2 l upwards, high dynamics, closed heat transfer medium circuit |
| Product code | IT-JUA40 |
Lauda Integral XT150
| Heating power, cooling power | 3.5 kW, 1.1 kW at 0 °C |
|---|---|
| Temperature range | -40…+200 °C |
| Pump pressure | 2.9 bar |
| Heat transfer medium volume | 2.6…8.1 l |
| Dimensions (D x W x H) | 550 x 335 x 660 mm |
| Preferred application/special feature | Reaction calorimeter, ALR from 2 l upwards, high dynamics |
| Product code | IT-LAINT150 |
Juchheim JUVO 500
| Heating power | 4 kW |
|---|---|
| Temperature range | Up to 350 °C |
| Heat transfer medium volume | About 1.2 l |
| Dimensions (Ø x H) | 147 x 510 mm |
| Preferred application/special feature | Standard applications, heating only |
| Product code | IT-JUVO500 |
Julabo CF41
| Heating power, cooling power | 2 kW, 0.4 kW at 0 °C |
|---|---|
| Temperature range | -40…+200 °C |
| Pump pressure | 0.7 bar |
| Heat transfer medium volume | 5.5 l |
| Dimensions (D x W x H) | 460 x 280 x 460 mm |
| Preferred application/special feature | Standard applications, bath thermostat |
| Product code | IT-JUCF41 |
Huber CC304
| Heating power | 2 kW at 0 °C |
|---|---|
| Temperature range | 28…300 °C |
| Pump pressure | 0.7 bar |
| Heat transfer medium volume | 5 l |
| Dimensions (D x W x H) | 335 x 210 x 392 mm |
| Preferred application/special feature | Standard applications, bath/circulation thermostat, heating only |
| Product code | IT-HUCC304 |
Huber CC202
| Heating power | 2 kW at 0 °C |
|---|---|
| Temperature range | 45…200 °C |
| Pump pressure | 0.7 bar |
| Heat transfer medium volume | 2 l |
| Dimensions (D x W x H) | 260 x 178 x 355 mm |
| Preferred application/special feature | Standard applications, bath/circulation thermostat, heating only |
| Product code | IT-HUCC202 |
Downloads
Accessories for Thermostats
Here you will find accessories like temperature control hoses, distributors, quick-action couplings and ball valves for heat transfer oil.
Temperature Control Hoses
These temperature control hoses are distinguished by their robust design:
- Stainless steel corrugated hose W.1.4404, DN10
- Parallel corrugation with an external textile glass tubular hose and overlying silicone insulating foam hose, fixed using shrink-on sleeves
- Welded liners, free of burrs and gaps on both sides, flat sealing, with union nut W.1.4571 M16x1
The pressing tensile strength of the sheathing at a temperature of up to 200 °C is 100 % and the maximum operating pressure is 8 bar. A reduction may be expected at higher temperatures.
We will manufacture special systems on request.
| Product code | Description |
|---|---|
| IT-THTUBE1-x | Thermostat hose DN10, flat sealed using M16 union nuts |
Distributor for Heat Carrier Oil
These distributors allow the multiple usage of a thermostat in conjunction with ball valves. A distributor is required for each of the influx and reflux.
| Product code | Description |
|---|---|
| IT-DISTRI-2-t | Distributor for heat transfer medium with 2 outlets |
| IT-DISTRI-3-t | Distributor for heat transfer medium with 3 outlets |
| IT-DISTRI-4-t | Distributor for heat transfer medium with 4 outlets |
Quick-Action Couplings for Heat Carrier Oil
A problem in the structure and expansion of a double jacket reactor is always the emptying of the heat transfer medium circuit. This problem can be elegantly solved with the aid of this proven quick-action coupling. The previous disadvantages of quick-action couplings such as sealing, loss of pressure etc. have been avoided through this new development
Advantages of these couplings
- Design for blocking on both sides
- Single-handed operation
- Low loss of pressure
- Minimized dead space volumes, small area required for installation
- Low connection force
- Suitable for vacuum
- Corrosion resistant
| Product code | Description |
|---|---|
| IT-QUICHCHECK-t | Quick-action couplings for heat transfer oil |
Ball Valves for Heat Transfer Oil
These ball valves are suited for the blocking of temperature circuits.
| Product code | Description |
|---|---|
| IT-BALLV10-t | Ball valve for heat transfer oil, DN19 |
Connection Adapter
This connection adapter guarantees a reliable transition from an M16x1 thread on the flexible metal hose to the DN15 connecting pieces on the temperature control jacket. A standard temperature controller may be used in the temperature control connection pieces.
The design ensures that the temperature controller has perfect contact with the medium and that the measured temperature is not influenced by the construction.
| Product code | Description |
|---|---|
| IT-ADAP90 | 90° connection adapter M16 to glass flange |
| IT-ADAP | Connection adapter M16 to glass flange |