Barcode Reader
The barcode software recognises two-dimensional barcodes for the unique identification of objects such as sample bottles or microtiter plates with the aid of a mini-camera.
The barcode labels may be created with the aid of a laser or ink-jet printer.
The generating character string can be up to 10 characters long. Thus, it is possible to generate well over 109 different codes.
| IL-BARCODE | Barcode Reader Module for two-dimensional barcodes, printing and recognition |
|---|---|
| IL-BARCODECAM | Mini-camera for Barcode Reader Module |
SciBot™ Tool Changer
The SciBot™ tool changer with an integrated power bus system is especially simply and robustly built (pat. pending). A tool is mechanically connected by two pins which move into the tool holder.
The pins are, at the same time, used as electrical contacts for the power bus system and bi-directionally transfer both electrical energy for the tool and the control and measurement data.
| IL-SCIBOT-WWS | Tool Changer for SciBot™ laboratory robot |
|---|
Pipette Changers
The pipette changer changes the pipettes quickly and securely. The pipettes can be taken from standard racks. An automatic check establishes that the pipette is correctly connected.
In a robot system several pipette tools may be fitted for pipettes of various sizes and volumes.
Steel cannulas and a washing station may be used as an alternative to pipettes.
A multiple-use pipette head is available on request.
| IL-SCIBOT-PIPCHA | Automatic Pipette Changing Station |
|---|---|
| IL-SCIBOT-PIPCHK | Automatic checking of the correct Pipette connection |
Surface Detector
This detector enables the surface of conductive liquids to be sensed with the needle point or pipette of such as a SciBot™ or AutoSam™ in order, for example, to follow the siphoning off of the sinking liquid surface.
The surface detector can be connected directly to an AutoSam™ or SciBot™ feature connector.
| Interface | TTL |
|---|---|
| Detection | Conductive liquids |
| Power supply | 5 V/50 mA |
| Dimensions (D x W x H) | 10 x 50 x 50 mm |
| IL-SCIBOT-LEVDET | Detection of liquid surfaces for SciBot™ laboratory robots and AutoSam™ |
|---|---|
| IL-SCIBOT-LEVDETUS | Ultrasonic sensor for the detection of liquid surfaces for SciBot™ laboratory robot |
| IL-SCIBOT-LEVDETUSWH | Tool holder for ultrasonic sonotrode |
Stirrers/Dispersing Devices
Various forms of stirring work, from gentle intermixing to emulsifying, can be carried out using the variable-speed stirrer.
The variable-speed stirrer is used as a tool in SciBot™ robots and has a holder for the SciBot™ tool changer.
| Rotational speed | 500...10.000 rpm |
|---|---|
| Performance | 5 W |
| interface | Analogue 0...10 V or RS232 |
| Power supply | 24 V/500 mA |
| IL-SCIBOT-STIRR | Traversable stirrer/dispersing device for SciBot™ tool changer |
|---|
pH Mini Electrode
This pH electrode requires an immersion depth of only 7 mm. The diameter at the measuring tip is only approx. 3 mm.
The electrode is therefore best suited for measurements in vials and microtiter plates.
| Interface | Standard pH |
|---|---|
| Dimensions (L x outer Ø) | 96 x 3 mm |
| Minimum immersion depth | 7 mm |
| IL-SCIBOT-PH | Traversable pH mini-electrode for SciBot™ laboratory robots, diameter 3 mm, minimum immersion depth 7 mm |
|---|---|
| IL-SCIBOT-PH-S7-VP | Special cable for pH mini-electrode, diameter 3 mm, S7 and Pt100 Lemo on VP |
| IL-SCIBOT-PHWH | pH mini-electrode tool holder for SciBot™ tool changer |
Ultrasonic Sonotrode
Such items as finely distributed emulsions may be produced in small vessels (type 1 ml) with the aid of an ultrasonic sonotrode.
| Frequency | about 30 kHz |
|---|---|
| Performance | 3...30 W |
| Interface | Passive switch contact |
| Power supply | 110/230 V/35 W |
| IL-SCIBOT-US | Traversable Ultrasonic Sonotrode with HF generator, approx. 30 kHz, 5...30 watts |
|---|---|
| IL-SCIBOT-USWH | Tool holder for Ultrasonic Sonotrode |