Laboratory automation is complex and requires a lot of knowledge? Forget this preconception. With the LabBox, you can get started with laboratory automation simple and intuitive.
10 of the most important interfaces are already integrated in the LabBox. This allows you to directly connect and control laboratory devices from a wide range of manufacturers. direkt anschließen und steuern.
These include, for example
With the proven software LabVision software) All processes are automatically logged all processes logged and important process parameters are seamlessly recorded.
Measuring just 222 x 58 x 124 mm, the LabBox is space-saving and can be mounted directly on your system regardless of its position. This eliminates the need for time-consuming project planning and cabling.
Our promise:
The LabBox offers you a cost-effective solution for getting started with the automation of preparative and analytical workstations in the laboratory or pilot plant. Benefit from the advantages of automation!
| Interfaces | 4 x RS-232 z. B. zum bidirektionalen Anschluss von Thermostaten, Waagen, Rührantrieben, pH-Messgeräten, MFCs |
| Inputs | 1 x analog input ±10 V (± 0.2 %), 0...20 mA (±0.3 %) Measurement resolution: 18 bit, <1 μV, <10 μA with sensor supply e.g. for connecting pressure sensors, flow meters, older laboratory devices, ... |
| Temperature | 1 x resistance temperature sensor input Pt100: -200 to 600 °C (±0.5 °C) with conductor breakage detection Measurement resolution: 24 bit, <0.0001 °C e.g. for measuring the internal temperature of a reactor |
| Outputs | 2 x digital output, active 24 V, PWM, PFM and PFLM, with actuator power supply and overload protection e.g. for direct switching of solenoid valves or small trace heating systems, ... |
| Interfaces | 2 x Ethernet interfaces 100 MBit/s e.g. for connecting devices via OPC-UA, Modbus-TCP, ... |
| Dimensions (W x H x D) | 222 x 58 x 124 mm |
